Tire crusher/waste tire recycling rubber crusher machine is to crush waste tires into rubber powder in different sizes. The final rubber powder is with purity of 99.99%, can be used to make rubber tiles, rubber mat, asphalt, waterproof material, filler of artificial grass.
The working process of tire crusher/waste tire recycling rubber crusher machine:
waste tire---tire circle cutter---tire strip cutter---tire slice cutter---rims separator---rubber crusher---magnetic separator---fiber separator---rubber powder
Specification of tire crusher/waste tire recycling rubber crusher machine:
1. Tire circle cutter is used to cut and open the joint of tire's side and top.
Tire circle cutter
(Both reinforced and nylon tires)
2. Rims separator is used to separate the steel rims around the tire to avoid the harm to the machine.
3. Tire strip cutter is used to cut the tire cirlce into strips 5x8 cm .
Tire strip cutter
4. Tire slice cutter is used to cut the strips into small chunks about 3.5 cubic centimeter.
Tire slice cutter
5. Rubber crusher is to crush the rubber blocks into powder in different sizes with purity of 99.99%.
|Front roll linear
|Roll speed ratio
|Max roller spacing
Advantages of our rubber crusher machine:
1. Crusher roller speed ratio: Ours is 1: 2.5, while the old type roller speed ratio is 1: 1.38.
2. Roller structure: Our two rollers are both grooved, which increase the friction and then improve the output, while the old type is one with groove, and the other is smooth.
3. Roller material: The roller is made by Welding wear resistant alloy materials, 5Cr6MnMo. We can offer you 3 years warranty of the roller. While the old types machine use cast iron to make the rollers, very easy to break or crack in two .
4. Machine feature: Our machine is energy saving 1/3. For example, producing 1T powder, our machine electricity consumption is only 150°, while their electricity consumption is about 250- 280° in making 1T powder.
5. Bearing: Our machine use rolling bearing, there are 8 pieces bearing inside, while the old machine use the slide bearings ( bush) , which is not as good as ours.
Q1,Are you a factory or a trading company?
A. We are a manufacturer with 30 years production experience in tire recycling plant and nail making machines. We have export license, we can offer you the factory prices.
Q2. Can you guarantee the capacity as you mentioned ?
A. Definitely yes, the grooved two rollers are specially designed to increase the output and ensure the working efficient.
Q3, are you sure the final rubber powder can be completely clean out of wire steel or nylon ?
A. The final powder purity can reach 99.9%. we have magnetic separator which can separate the wire steel from the rubber powder.
For more information, please feel free to contact us anytime.
Mobile: +86 15738242977