1-1. Basic introduction
Whole tire shredder ZPS-900 &ZPS-1200 Parameter
| Tire shredder | ||
| Parameter/model | ZPS-900 | ZPS-1200 |
| Adopt tire (mm) | ≤ 900 | ≤ 1200 |
| Output block size (mm) | 50×50 | 50×50 |
| Power (kw) | 22×2 | 55×2 |
| Capacity (kg/h) | 1500-2000 | 3000 |
| Size (mm) | 3800×2030×3300 | 4100×2730×3300 |
| Weight (kg) | 6000 | 16000 |
Use:
ZPS-900 tire shredder can directly crush tires smaller than 900mm tires. ZPS-1200 tire shredder can crush whole tire no more than 1200mm. At the general temperature, can be put directly crushed into 50 * 50 mm block, so the next rotating can grind into 10-30 meshes or wire and fiber separation equipment.
Feature:
This machine is a compact structure, advanced technology, low energy consumption, high efficiency, smashing off the test room for the structure, maintenance is particularly convenient; tools with carbide surfacing technology, high hardness, high wear resistance, and repeated repair using, so has a longer service life; rotary screen for the lattice structure of steel mesh, blanking large area, enabling the screening of qualified rubber. After the partition of large tires can achieve the effect of the same!
Mechanical description: the tires of 800mm diameter and rubber ring can directly be broken into 50*50 mm of rubber block.
Notes for using whole tire shredder:
a. Inject gear oil into gearbox oil (hypoid gear oil), main bearings use calcium-based grease lubrication, three months after the operation of the machine, the oil should be replaced and clean the fuel tank. Since then change the oil once time every year.
b After deal with 3,000 tons of waste rubber (in normal circumstances),the buyer should grind the blade cutting edge once time. The blades is the wear parts, the general service life is 5-6 years, when delivering the machine to the buyer, the shredder will be equipped with edge hardness layer patching material (electrodes).
5. Double Rolls Rubber Crusher XKP-560
Use:Mainly used for crack large rubber blocks into 40-50mm small rubber blocks.
Technical parameters:
Structure: The rollers adopt alloy cold hard cast irons with wear-resisting, durable characters. The mill flour is with teeth, high groove.
In order to extend the service life of the cracker, we suggest build foundations for rubber cracker.
The configurations of our XKP-560 rubber cracker are nylon bush grease lubrication and hard gear surface reducer with lower noise and longer service life.
Our crackers are designed humanized with nice operating platforms, all the wires will be connected well from controlling system to motor. When using the machine, the customers just need to connect directly to the power.
1-2. Features
1-3. Parameter of Waste tire shredder for rubber powder
| Single hook Tire wire drawing machine | Double hook Tire wire drawing machine | |||||||
| Capacity (tires/h) | 40-60 | Capacity (tires/h) | 60-120 | |||||
| Adapt tire size (mm) | ≤ 1200 | Adapt tire size (mm) | ≤ 1200 | |||||
| Powder (kw) | 11 | Powder (kw) | 15 | |||||
| Pulling force (T) | 15 | Pulling force (T) | 30 | |||||
| Size (mm) | 3890×1850×3640 | Size (mm) | 2250×1650×1500 | |||||
| Weight (T) | 2.8 | Weight (T) | 6 | |||||
| Tire Cutting machine | |
| Parameter/model | TC-300 |
| Capacity (tires/h) | 40-60 |
| Adapt tire size (mm) | ≤ 1200 |
| Powder (kw) | 5.5 |
| Size (mm) | 2010×1090×1700 |
| Weight (T) | 1.2 |
| Tire shredder | ||
| Parameter/model | ZPS-900 | ZPS-1200 |
| Adopt tire (mm) | ≤ 900 | ≤ 1200 |
| Output block size (mm) | 50×50 | 50×50 |
| Power (kw) | 22×2 | 55×2 |
| Capacity (kg/h) | 1500-2000 | 3000 |
| Size (mm) | 3800×2030×3300 | 4100×2730×3300 |
| Weight (kg) | 6000 | 16000 |
| Rubber crusher machine | |||
| Parameter/model | XKP-400 | XKP-450 | XKP-560 |
| Front Roll diameter(mm) | 400 | 450 | 560 |
| Back Roll diameter (mm) | 400 | 450 | 510 |
| Roll working length(mm) | 600 | 800 | 800 |
| Roll ratio | 1:1.237 | 1:1.38 | 1:1.3 |
| Front roll speed (m/min) | 17.32 | 23.2 | 25.6 |
| Adjusting nip range(mm) | 0-10 | 0-10 | 0-15 |
| Motor power (kw) | 37 | 55 | 110 |
| Overall dimensions (mm) | 3950×1800×1780 | 4770×1846×1835 | 4750×2300×2000 |
| Weight (t) | 8 | 12 | 20 |
1-4. Sample pictures of Waste tire shredder for rubber powder
2. CUSTOMER FEEDBACK
3. EXHIBITION
4. PACKAGE AND DELIVERY
5 . COMPANY INFORMATION
5-1 OULI COMPANY
Established in 1997 , Qingdao Ouli machine CO., LTD was located in Huangdao District, the west coast of Qingdao city,Shandong province ,China.
Branches in Suzhou , Dalian etc were created in 2012 and 2015 .
We are specialized in rubber machinery designing,manufacturing and maintenance works
OULI main products:
Rubber mixing equipment / Rubber vulcanizing machine / Automatic and semi-automatic waste tire recycling equipment / Rubber calendaring machine / Rubber extruding equipment / Reclaimed rubber production line
Our machines have been exported to more than 20 countries such as America, Canada, Australia, Southeast Asia, Middle East,Brazil .
5-2 OULI workshop
6. FAQ
Q1:Why choose Us?
1.More than 20 years history of OULI MACHINE factory.
6-8 years foreign sales experience staff, more efficiency and professional.
Engineers oversea service more than 20 countries .
2.ISO:9001,CE,BV certification approval
3.Service timely, Promise to give solution within 12 hours,Guarantee customer trouble free.
4.Short delivery date, No delay. Accept urgent order for prompt shipment.
Q2:What about delivery date?
It will be according to the quantity of machines. Normally machines will be shipment within 20-30 days after get deposit, No delay.
Accept urgent order for prompt shipment.
Q3:What's the warranty statement?
OULI MACHINE warrants all the products manufactured by OULI MACHINE to free from defects in material and workmanship Under normal use of a period of 12 months or 36months after the date of the original purchase price if repair or replacement is not possible of practical, OULI MACHINE warranty covers ONLY the product itself.
OULI MACHINE will assume no liability for labor costs, installation costs, or other losses.
Your warranty rights will be honored
Only when the product has been installed and used properly as deemed by OULI MACHINE,OULIMACHINE will not repair products damaged by improper use or faulty installation.
Q4:What about OULI oversea service ?
OULI will arrange oversea setting up and training works if customer need .
Customer should pay for accommodation , tickets and salary .
Meanwhile OULI has branches in different areas like north America , Southeast Asia , Brazil etc , etc .